Image above does not reflect any upgrades Scroll cursor over above image for more information (NOT DRAWN TO SCALE)
Hinged Panel
Door Panel
Fixed Panel
↑ 5mm Gap
Gap of 4mm is recommended, however this gap is adjustable up to ±1mm. For simplified calculations, gap measurements of 5mm is used.
↑ 5mm Gap
Gap of 4mm is recommended and can be adjusted between 3mm to 5mm. For simplified calculations, gap measurements of 5mm is used.
Hinged Panel
Door Panel
Fixed Panel
↑ 5mm Gap
Gap of 4mm is recommended, however this gap is adjustable up to ±1mm. For simplified calculations, gap measurements of 5mm is used.
↑ 5mm Gap
Gap of 4mm is recommended and can be adjusted between 3mm to 5mm. For simplified calculations, gap measurements of 5mm is used.
Above base diagram is an approximate calculation and should only be used as a guideline. Silicon beading of 5mm has not been approximated into the calculations of the above measurements, 3mm silicon beading is recommended. Above measurements will change based on the amount of gap spacing used. For door hinges a gap of 4mm is recommended, however this gap is adjustable up to ±1mm, for simplified calculations a gap of 5mm has been used. Between panels a gap of 4mm is recommended, however the gap can be adjusted between 3mm to 5mm, for simplified calculations a gap of 5mm has been used.
Scroll cursor over above image for more information (NOT DRAWN TO SCALE)
Image above does not reflect any upgrades (NOT DRAWN TO SCALE)
Glass panels are cut square so you need to check that you walls are plumb and floors are level within a 5mm tolerance, find out more information here.
Wall tiles must be from floor to ceiling or walls must be tiled to the height of the screen because the position of fittings are set.
Handle
Knob Handle
Simple knob handle.
A simple design favoured by many customers.
Finish: Chrome
[Included in Price]
Pull Handle
Easy grip twin D-shaped pull handles.
Finish: Chrome
[add $15.00]
TowelBar and Pull Handle Combo
Towelbar handle combined with a D-shaped pull handle.
This handle has a towelbar which allows you to conveniently reach for your towel after you have finished with your shower.
Finish: Chrome
[add $20.00]
Hinges
Spring-loaded, glass-to-glass hinges.
Self centering action from about 25°.
Pivots 90° in both directions, a total of 180°.
Glass has pre-set cutouts for hinges.
Finish: Chrome
Standard Hinges (default)
Max Weight (32kg) Max Width (650mm)
[Included in Price]
Heavy Duty Hinges (upgrade)
Max Weight (37kg) Max Width (750mm)
[add $40.00]
Wall Brackets
L-Shaped wall brackets.
Used to attached glass panels to the wall.
Glass has pre-drilled holes for brackets.
Wall brackets positioned: - 200mm from the top & - 227mm from the bottom
Screw and plug included.
Finish: Chrome
[Included in Price] (4x Wall Brackets)
Floor Brackets
Floor Bracket (1x Bracket)
[Included in Price]
Extra Floor Brackets (2x Brackets)
[add $12.00]
U-Shaped floor bracket.
Bracket measures 30mm x 30mm x 18mm.
The floor bracket will raise the glass panel by approximately 4mm when installed.
Used to secure glass panel to the floor.
Finish: Chrome
Waterbar
Waterbars are excellent for flat or level bathroom floor, without a fall to waste or hob.
It is siliconed to the floor.
Provides a barrier to stop water flowing out.
Finish: Chrome
[Included in Price] (1x Waterbar)
PVC Water Stopper U-Profile
U-Shape PVC water stopper profile.
Attach to the underside of the door panel to stop water trickelling under the door clearance.
The diagram (below) illustrates how this profile is to be attached to the under side of a door panel.
Material: Hard PVC plastic and Soft Vinyl lip
[Included in Price] (1x PVC Water Seal)
Water Stopper Seal, H-Shape for Vertical Side of Return Panel
Vertical PVC Seal (0x PVC10-H 2000mm)
[Not Included in Price]
Add Vertical PVC Seal (1x PVC10-H 2000mm)
[add $10.00]
H-Shape PVC water stopper profile.
Attached to vertical side of fixed panels near the strike side of a door panels.
The diagram (below) illustrates how this profile is to be attached to the side of a fixed panel (upper blue bar) at the strike side of the door panel (lower blue bar).
Material: Hard PVC plastic and Soft Vinyl lip
Setting Blocks
Setting Blocks (0x Packs)
[Not Included in Price]
Add Setting Blocks (1x Pack)
[add $5.00]
Setting blocks are essential for a frameless shower screen installation to be successful.
Provides a cushion for the glass panel to sit on and support the panels weight.
Glass edges are prevented from touching the tiles because the setting block ensures there is the correct glass-to-tile spacing. The glass edge should never come in contact with any hard surface.
Recommended for DIY installations or if your installer does not have his own setting blocks.
Assorted Pack of 5
3.2mm thick x 12mm wide x 50mm length (3pcs)
10mm thick x 12mm wide x 50mm length (2pcs)
NOTE: All Yss approved third-party installers have their own setting blocks.
Simple spray & wipe solution takes minutes to apply & cuts cleaning time by up to 90%.
Each pack contains everything you need including cleaner and polishing pad.
Simply clean the glass with the pre-treatment cleaner included.
Apply the EnduroShield protective layer and wait for it to dry.
Premium Quality Grade 'A' Toughened Safety Glass
The shower screen glass panels is made from premium quality Grade A toughened glass.
This shower screen complies with the Australian Standards AS1288 for design and complies with the Australian Standards AS2208 for toughened grade A safety glass quality.
Material: 10mm thick Clear Toughened Grade A Safety Glass
Packaging Weight & Size
Package
Length
Width
Height
Weight
Panel 1 of 3
210 cm
30 cm
5 cm
10 kg
Panel 2 of 3
210 cm
70 cm
5 cm
30 kg
Panel 3 of 3
210 cm
60 cm
5 cm
25 kg
Box of Fittings
25 cm
25 cm
15 cm
5 kg
(actual product may vary slightly from illustrated pictures)
